Product Details
VF Tuner Tune package (example files / Off the Shelf Calibrations)
Note, a VF Tuner WiFlash Kit is required to upload these files!
https://vftuner.com/products/pro-tuner-wiflash-tuning-kit
Information regarding our calibration packages:
Our Calibrations are emissions compliant. No Calibration files have any DTCs / emissions reporting / or modification that modifies emissions.
The following is an example of various tables / data modified in VF Tuners Calibration Packages:
- Shift Tables (upshift and downshift tables) (for AT non CVT Transmissions)
- Throttle Response Mapping
- Valve Timing during power demand
- Ignition Timing during Power demand
- Fuel Ratios during power demand (without modification to catalyst protection or stoic requirements)
- Torque tables (for response / power)
- Load and Airload controls (for response and power)
- Limiters such as: Rev limiter, Speed Limiters, 4x4 Limiters (shifting for off road)
- and many other tables for a better driving experience.
VF Tuner provides calibration example files for the following octanes: - regular octane fuel (85-87 octane, generally)
- Premium octane fuel(90-94 octane, generally)
- Tow mode tunes (Trucks)
VF Tuner does not provide calibrations for alternative fuels at this time, with the exception of any vehicle that is already alternative fuel / flex fuel compatible.
Certain vehicles can also get the benefit of our custom patches! These custom patches provide special features not normally available with the vehicle. Note, not all vehicles have these features.
Features such as : - Gear lock (ability to lock your AT transmission gear when in S Mode)
- Toyota EROM Gen1 AFR 3D AFR Mapping. Replacing the stock 2D WOT Table with a finer resolution 3D table that works based on Engine Speed and Load
- Map Switching (enables different tune modes based on selected map switch)
- and more!
Expected power and torque gains depends on the platform.
On average, based on the engine type can be found below.
Every Dyno result was independently tested on independent dynos.
note, these are dyno tested figures that would could assume are achievable using premium fuel with a vehicle that has been properly maintained.
All examples are with premium fuel. - 2GRFKS 3.5L - Tacoma - 20-25 Horsepower (dyno tested)
- 2GRFKS 3.5L - Lexus - 18-20 horsepower (dyno tested)
- 2GRFE 3.5L - 20-35 horsepower (depending on platform)
- 2AZFE 2.4L - 20-27+ Horsepower (Dyno tested on the Matrix XRS)
- 2ARFE 2.5L - 25+ Horsepower (Dyno tested on the Scion tC)
- 1GRFE 4.0L - Tacoma/others - 16-22 horsepower (dyno tested)
- 1URFE 4.6L - 20-25+ Horsepower (dyno tested on a tundra)
- 3URFE 5.7L 25-30+ Horsepower, 100+ ft lbs of torque (with gearlock) Dyno tested
- 2UZFE 4.7L - 20+ horsepower 40+ ft lbs of torque (dyno tested GX470)
- 2uZFE 4.7L NON VVTi - 12-15 horsepower, 25+ ft lbs of torque (dyno tested Tundra 4.7L)
- Lexus IS250 2.5L - 12-15+ horsepower, (dyno tested)
- Lexus IS350 2GRFSE 20+ horsepower (dyno tested)
- Mazda skyactiv 2.0L 20+ horsepower (dyno tested on 100+ vehicles)
- Mazda skyactiv 2.5L 25-30+ Horsepower (dyno tested on 100+ vehicles)
- Mazda Skyactiv 1.5L 8-14 horsepower (dyno tested on 50+ vehicles)
- Mazda MX5 Variant 2.0L 25-28+ Horsepower (dyno tested on 200+ vehicles)
- Mazda MX5 Variant "ND2" 2.0L - 18-22+ horsepower (dyno tested)
- Corolla 2.0L M20AFKS - 15-20 + Horsepower (dyno tested)
- GR86 BRZ 2022+ OTS - 14-18+ horsepower (dyno tested on dozens of vehicles)
- Nissan Frontier 15+ horsepower 25+ Ft lbs
many dyno sheets can be found on our facebook page, along with test cars, models, and other information - https://www.facebook.com/VFTunerLLC
Shipping Details
All kits on our site that ship are shipped by UPS, USPS or DHL. For international shipments we normally ship by USPS(parcel / post) or DHL