Map switching and features
See which VF Tuner features are listed for your vehicle, compare the available modes, and find the steps for switching maps with a standard cruise lever.
Which vehicles get which features?
Match your model year, engine, and transmission in the vehicle details. Coverage can vary by ECU or calibration.
| Feature | Vehicles and modes |
|---|---|
| Three selectable maps | Tundra 5.7L & Sequoia 5.7L, GX 460, Scion tC 2.5L (EROM V2 announcement), and Tacoma 3.5L 6MT (non-supercharged OTS). |
| Direct AFR target control | Tundra 5.7L & Sequoia 5.7L, GX 460, and Scion tC 2.5L (all three tunes). |
| Ignition controls | Tundra 5.7L & Sequoia 5.7L includes ignition controls. GX 460 and Scion tC 2.5L list Simplified Ignition. The tC uses one ignition map shared by all three tunes. |
| Overland Mode | Tundra 5.7L & Sequoia 5.7L, with optional second-gear start. |
| Tow and hill modes | Tundra 5.7L & Sequoia 5.7L (Enhanced Tow), GX 460 (Smart Tow / Hill), and Tacoma 3.5L 6MT (87-octane Tow Mode). |
| Gear Lock V2 | Tundra 5.7L & Sequoia 5.7L |
| Off-Road Crawl Throttle | GX 460 in 4LOW. |
| Sand / Mud Power Mode | GX 460 |
| Burble | Scion tC 2.5L (EROM V2 announcement). |
How to switch maps
Standard cruise lever procedure. The vehicle must be on and stationary.
- Pull the cruise lever toward you and hold it at CANCEL to enter map switching.
- Move the lever up or down to select a map. The tachometer indicates which map is selected.
- Use CANCEL again to exit. Your map stays selected after shutdown, so there’s no need to reflash or reselect it at each startup.
| Tachometer display | Map 1 | Map 2 | Map 3 |
|---|---|---|---|
| Standard | 1,000 RPM | 2,000 RPM | 3,000 RPM |
| Select vehicles such as Tacoma | 1,000 RPM | 3,000 RPM | 5,000 RPM |
Disconnecting the battery may clear your selection. Select your map again if needed.
Radar-assisted cruise control: VF Tuner announced a separate map-switching method for these vehicles. Check current support for your setup.
Map switching by vehicle
Launch artwork is shown for reference. Timing on the original graphics applies to those announcements.

2007–2021 Tundra & 2008+ Sequoia 5.7L
EROM V2 for the listed 5.7L applications.
- Three-way map switching with Direct AFR and ignition controls
- Overland Mode with optional second-gear start
- Enhanced Tow Mode and Gear Lock V2

2010+ Lexus GX 460
Switch among three maps with the cruise controls. Features can be customized for each map.
- Direct AFR targets and Simplified Ignition
- Off-Road Crawl Throttle Mode in 4LOW
- Smart Tow / Hill Mode and Sand / Mud Power Mode
The announcement lists the features as free with a WiFlash kit.

Tacoma 3.5L 6MT OTS tune
For non-supercharged 3.5L Tacomas with a six-speed manual. Three maps are built into one file, each with Octane Learn.
- Map 1: 87-octane tune
- Map 2: premium-fuel tune
- Map 3: 87-octane Tow Mode
The tune includes a 6,600 RPM limit, enhanced throttle response, rev hang delete, and first-gear throttle limit correction.
The release graphic cites gains of up to 25+ hp and 30+ lb-ft on Map 2 with premium fuel after Octane Learn completes (3–4 drive cycles). It also previews a separate supercharged OTS offering.

EROM V2 launch announcement
2012+ Scion tC 2.5L
- Three-way map switching via cruise controls
- Direct AFR target control for all three tunes
- One shared ignition map for all three tunes
- Burble
Other tuning support and feature previews

Nissan Altima SR VC-Turbo 2.0L
Expanded map and table selection, more tuning parameters, and updates to custom ECU reading and writing. The announcement previews custom boost control.

2015+ Subaru DIT
Full tuning support. The launch artwork previews additional custom features.

Fiat 500 Abarth
ECU reading, writing, and tuning with hundreds of defined tuning parameters.

Alpine A110S
The update highlights thousands of tunable parameters. Custom boost control and custom features are shown as previews in the original announcement.

Jaguar F-Type Coupe
ECU and TCU read, write, and tune support at one price, with no additional charge for TCU support in the announcement. Additional Jaguar and Land Rover vehicles are covered by the package. Check your exact application.

Legacy Jaguar CAN
High-speed CAN datalogging, ECU reading, and ECU flashing for supported vehicles. Ford-type ECUs require a FEPS-compatible device for flashing.
- X350 XJ6 / XJ8: 3.0L V6, 3.5L V8, or 4.2L naturally aspirated V8
- X350 XJR: 4.2L supercharged V8
- S-Type: V6 or 4.2L V8
- XK8: 4.2L V8
- XKR: 4.2L supercharged V8

Protocol announcement
Legacy Toyota / Lexus K-Line ECU unlocking
The announcement describes a WiFlash bench unlock followed by full tuning. It names 2UZ and 5VZ applications and previews broader coverage.
Check your exact vehicle
Use the supported vehicle list to verify your vehicle and ECU. For an individualized calibration, find an independent Pro Tuner.